Description
UltraCare Mould Remover is an innovative formula to be used for the treatment of degraded surfaces due to the action of algae and mold. Quickly removes mold and sanitizes stone surfaces, plaster (including painted), concrete, terracotta, joints, ceramics, glass, klinker.
The product is ready to use and does not require dilution with water. Shake before use. Spray directly onto the surface to be cleaned by holding the spray upright from a distance of about 20 cm. Distribute the product homogeneously on the surface to be treated with a cloth to facilitate penetration; remove the excess completely to avoid dripping. To achieve greater effect, you can apply the product several times with at least 15 min away from one application to another by repeating the steps described above. At the end of the cleaning operation (after waiting at least 10 minutes) carry out a wash with cloth or sponge moistened with only clean water.
With 0.75 l UltraCare Mould Remover you can treat up to 15 m². surface (one hand).
The yield is strongly influenced by the degree of absorption and surface finish of the treated material.
