Description
Introduction:
Bond It Multi-Purpose Ready Mixed Filler – For Durable and Seamless Repairs
Bond It Multi-Purpose Ready Mixed Filler is a professional-grade repair solution designed for use on a wide variety of surfaces, including plaster, stone, brick, render, plasterboard, and wood. Whether you're filling small cracks in a wall or patching up deeper holes in woodwork, this versatile filler delivers excellent results every time.
Formulated to provide a smooth, crack-resistant finish, it is ideal for home improvement tasks, decorating preparation, and general repair jobs. It can be sanded down to a fine surface once dry, and overpainted or stained for a flawless finish that blends seamlessly with surrounding surfaces.
The product is ready to use straight from the tub and requires no mixing. It's water-based and solvent-free, making it a safer and more eco-friendly choice for indoor use, while still being tough enough for exterior applications when appropriately sealed.
Where and How to Use:
-
Ideal for Repairs On:
- Cracks and holes in plaster and plasterboard
- Surface damage to brick, render, and stone
- Gaps or imperfections in wooden surfaces
- Application Instructions:
- Ensure surfaces are clean, dry, and free from dust, grease, or other contaminants.
- Stir the filler thoroughly before use.
- Using a spreader or spatula, apply the filler directly from the tub, pressing firmly into the gap.
- For deeper holes (over 9mm), apply in layers, allowing each layer to dry for approx. 1 hour.
- Overfill slightly to allow for sanding. Finish with a damp knife for best results.
- Once fully dry (1–8 hours depending on depth and temperature), sand smooth and overpaint or stain as desired.
- Painting & Finishing:
- Compatible with most emulsion and solvent-based paints, as well as wood stains.
- For exterior use, allow the filler to dry for at least 12 hours before applying an oil-based protective paint.
Important Product Details:
-
Container Size: 750g plastic tub
-
Colour: Off-white paste
-
Drying Time: 1 to 8 hours depending on depth and ambient temperature
-
Layer Depth Limit: Up to 9mm per application layer
-
Storage Temperature: Between +10°C and +20°C
-
Shelf Life: 24 months when unopened in original packaging
-
Tool Cleaning: Wash immediately after use with warm soapy water
-
Environmental Note: Always dispose of containers according to local environmental regulations.
Limitations & Safety Advice:
- Not suitable for application on metal or plastic surfaces.
- Avoid application if rain is expected within 5 hours.
- Do not apply at temperatures below +5°C.
- Not suitable for areas exposed to constant water immersion (e.g., inside showers or wet rooms).
- For deep cavities, use Bond It One Hit Wonder Lightweight Filler instead.
- For external use, always seal with oil-based paint after full drying.
Package Content:
- 3 x Bond It Multi-Purpose Ready Mixed Filler – 750g
Always refer to the product's SDS (Safety Data Sheet) for full health and safety guidance. Keep out of reach of children.
