Applied to the grouted surface ULTRACARE GROUT PROTECTOR gives durable and periodically restorable stain protection (depending on use and exposure) to both ceramic material and cement joints. Treated surfaces are suitable for food contact.

Read more less

UltraCare Fuga Fresca is a ready-to-use paint that allows you to renew and modify the color of cement joints of floors and coatings inside in a quick and easy way. UltraCare Fuga Fresca is used to eliminate inhomogeneity of color of the joints determined, for example, by an incorrect execution of the same or to eliminate unsightly stains resulting from use. TECHNICAL CHARACTERISTICS: Thanks to its special characteristics and its excellent covering power, it allows to obtain uniform color joints, with a lower absorption of water and, therefore, easier cleanability. IMPORTANT NOTICES: Do not use outside or on surfaces subject to continuous immersion (swimming pools, tubs, etc.).In the case of terracotta floors and coatings or stone materials with porous and absorbent surface, the product should be applied only on joints to avoid staining.Apply the product to fully seasoned cement joints (time varying depending on the specific type of escape). Do not use on epoxy grout mortars or on fractionation joints sealed with silicone or polyurethane products.Do not use as a consolidator of inconsistent joints and with lack of mechanical performance as a result of incorrect hydration.In case of contrast between old and new color may require more treatments. Shake the bottle before use. Remove the cap and apply the product by applying pressure with the special sponge on the surface of the joints clean and free of insubstantial parts, mold and limescale deposits. Wait a few minutes for the product applied to the joints to appear dry (depending on environmental conditions). Next, remove with a moistened sponge any burrs on the tiles. After use, wash the dispenser bottle sponge thoroughly.

Read more less

Bostik Express Pointing Mortar has been specially developed to quickly repair damaged masonry joints in brick and stonework, without having to mix mortar. It can also be used to seal between stones, brick slips and around lead flashing. It is supplied ready to use and is easily applied with a cartridge gun, internally or externally. It does not require a primer on most substrates, even on slightly damp surfaces. It can be overpainted where required. Quick and easy to apply with a cartridge gun Produces durable, weather-resistant joints Over paintable with water-based and synthetic paints

Read more less

Coverage: 6 linear metres (approx.) per cartridge of joint 10mm in height x 5mm depth. Ready to use, quick and easy to apply mortar for masonry joints Produces durable, weather resistant joints Overpaintable with water based paint Quickly repairs damaged masonry joints in brick and stonework, without having to mix mortar. It will also seal between stones, brick slips and around lead flashing. It is ready to use and is easy to apply with a cartridge gun, internally or externally. It does not require a primer on most substrates, even on slightly damp surfaces and can be overpainted where required.

Read more less

Covaplus Vinyl Matt Johnstone's Trade Covaplus Vinyl Matt is a high-quality matt emulsion, suitable for all interior walls and ceilings, providing excellent opacity, coverage and application. Ideal for use on wood, metal and plaster as well as wallboards, concrete, cement rendering, brickwork and blockwork in internal situations, our Covaplus Vinyl Matt is available in thousands of colours via the Johnstone's Tinting System. Johnstone's Trade Covaplus Vinyl Matt will cover approximately 12-14 square metres per litre, depending on the nature and porosity of the surface being painted, and is touch dry in 1-2 hours and recoatable after 2-4 hours. USE ON - Interior SUBSTRATE - Blockwork, Brickwork, Cement Render, Concrete, Plaster, Wallboards APPLICATION - Brush, Roller and Spray FINISH - Matt TYPE - Water Based RECOAT - 2-4 Hours COVERAGE - 12-14 sqm / Litre

Read more less

Covaplus Vinyl Matt Johnstone's Trade Covaplus Vinyl Matt is a high-quality matt emulsion, suitable for all interior walls and ceilings, providing excellent opacity, coverage and application. Ideal for use on wood, metal and plaster as well as wallboards, concrete, cement rendering, brickwork and blockwork in internal situations, our Covaplus Vinyl Matt is available in thousands of colours via the Johnstone's Tinting System. Johnstone's Trade Covaplus Vinyl Matt will cover approximately 12-14 square metres per litre, depending on the nature and porosity of the surface being painted, and is touch dry in 1-2 hours and recoatable after 2-4 hours. USE ON - Interior SUBSTRATE - Blockwork, Brickwork, Cement Render, Concrete, Plaster, Wallboards APPLICATION - Brush, Roller and Spray FINISH - Matt TYPE - Water Based RECOAT - 2-4 Hours COVERAGE - 12-14 sqm / Litre

Read more less

Planitop Fast 330 is ideal if you want to regularize non-planar supports to make them suitable, in a short time, for laying ceramics and stony materials or waterproofing with liquid membranes or elastic concrete systems. This is possible thanks to its high hardening and adhesive capacity, even on high thicknesses, without shrinkage and without cracking or cracking. Technical information: Areas of application: wall and floor, indoor and outdoor, for ceramic and natural stone coatings. Working time: about 20 minutes. Application thickness: 3-30 mm. Wait time for ceramics and natural stones: 4 hours, variable depending on temperature conditions. Application: smooth spatula. EMICODE: EC1 R – very low emission. Colour: grey. Storage: 12 months. Consumption: 1.45 kg/m2 per mm thick. Packaging: 25kg PE vacuum bags.

Read more less